Can I post Images?
+7
DAWASHBOSS
Jerrys Towing
wm081551
hdtower2
gentlyrotate
shuman services
harold67wm
11 posters
Page 1 of 2
Page 1 of 2 • 1, 2
Can I post Images?
Can I post Images?
Images can indeed be shown in your posts. However, there is no facility at present for uploading images directly to this board. Therefore you must link to an image stored on a publicly accessible web server, e.g. http://www.some-unknown-place.net/my-picture.gif. You cannot link to pictures stored on your own PC (unless it is a publicly accessible server) nor to images stored behind authentication mechanisms such as Hotmail or Yahoo mailboxes, password-protected sites, etc. To display the image use either the BBCode [img] tag or appropriate HTML (if allowed).
If you are using Photobucket, you can just "generate image code for message board" and paste the image codes in the post
Images can indeed be shown in your posts. However, there is no facility at present for uploading images directly to this board. Therefore you must link to an image stored on a publicly accessible web server, e.g. http://www.some-unknown-place.net/my-picture.gif. You cannot link to pictures stored on your own PC (unless it is a publicly accessible server) nor to images stored behind authentication mechanisms such as Hotmail or Yahoo mailboxes, password-protected sites, etc. To display the image use either the BBCode [img] tag or appropriate HTML (if allowed).
If you are using Photobucket, you can just "generate image code for message board" and paste the image codes in the post
Last edited by harold67wm on Thu 24 Dec 2009, 00:07; edited 2 times in total (Reason for editing : update)
Re: Can I post Images?
ok, I can post photos from photobucket, but as have yet not been able to use any that I have loaded on yuku, when i copy the link locations it doesnt work here?
Re: Can I post Images?
Hey now its there? I see my oil rig?
Harold did you change it, or do I have to add the [img] xxxxx [img] to them to make it work?
Harold did you change it, or do I have to add the [img] xxxxx [img] to them to make it work?
Re: Can I post Images?
gentlyrotate wrote:Hey now its there? I see my oil rig?
Harold did you change it, or do I have to add the [img] xxxxx [img] to them to make it work?
I fixed it for you and yes you do have to you the img tags
Re: Can I post Images?
goes like this...
[img]IMAGE LINK HERE[ /img]
Just be sure that you close your image tags where they are like this:
Code:
[img ]IMAGE LINK HERE[/img]
Try not to add spaces in between or on the outside of the image link because that can mess up the image that will display in the post.
OR you can just use the html code with out the [IMG] tags
[img]IMAGE LINK HERE[ /img]
Just be sure that you close your image tags where they are like this:
Code:
[img ]IMAGE LINK HERE[/img]
Try not to add spaces in between or on the outside of the image link because that can mess up the image that will display in the post.
OR you can just use the html code with out the [IMG] tags
Last edited by harold67wm on Thu 24 Dec 2009, 00:03; edited 1 time in total (Reason for editing : update)
Re: Can I post Images?
whoa,thats complicated!!lol
hdtower2- Premier Member
- Name : tony coffey
Years in towing : 26
Location : effingham il
Re: Can I post Images?
It's just like puting pics on layouts and chater boxes. all you have to do it convert the image file name it to a Hyper Text Markup Language then post the code. This is one i just make to show how its done.
<html>
<head>
<title>Hello HTML</title>
</head>
<body>
<p>Hello Harold!</p>
</body>
</html>
I had to disable HTML so it showd up. if i did it right my next post will say Hello Harold! in the center on the post.
<html>
<head>
<title>Hello HTML</title>
</head>
<body>
<p>Hello Harold!</p>
</body>
</html>
I had to disable HTML so it showd up. if i did it right my next post will say Hello Harold! in the center on the post.
Re: Can I post Images?
still too complicated.need an easier way to download pics. even a couple i posted from photobucket shrunk when posted here.
hdtower2- Premier Member
- Name : tony coffey
Years in towing : 26
Location : effingham il
Re: Can I post Images?
if u use the HTML to copy on here it will be bigger and you dont need the angle bracket with the IMG in it. dont use the direct link cuz if you delete the pic it deletes on here to. the IM E-MAIL code makes them small.
Re: Can I post Images?
not quite sure what the hell you just said....pm me.
hdtower2- Premier Member
- Name : tony coffey
Years in towing : 26
Location : effingham il
Re: Can I post Images?
If you are using Photobucket... and only want one picture... use the photobucket deal on the sidebar, just highlight the picture you want to use and copy the IMG code and paste it in the post
Re: Can I post Images?
this is not looking good. took me 3 years to learn how to post photos the first time. now trying to learn all over again,,,, this is not good.
DAWASHBOSS- Full Member
- Name : Danny Cassello
Years in towing : 33
Location : East Hartford ; North Haven, CT
Re: Can I post Images?
This is how I am doing this.....
Go to your photobucket account in a new tab / window
Enlarge the pic you want to post, do NOT copy the html code from the thumbnail.
When the pic is enlarged, on the left bottom of the pic there are boxes with "codes" click on the HTML code line it will copy by clicking once with the left mouse button
Come to your post where you want the pic posted and paste the code there. Click preview and it will show it before you post it.
I hope this helps anyone that hasnt figured it out yet.
Danny, call me and I will talk you through it on the phone.
The copied "HTML code" will look something like this.........
/"https://s238.photobucket.com/albums/ff230/Towgirlfl/99%20Dodge/bumpers/?action=view¤t=IMG00900-20091218-1228.jpg" target="_blank">
Go to your photobucket account in a new tab / window
Enlarge the pic you want to post, do NOT copy the html code from the thumbnail.
When the pic is enlarged, on the left bottom of the pic there are boxes with "codes" click on the HTML code line it will copy by clicking once with the left mouse button
Come to your post where you want the pic posted and paste the code there. Click preview and it will show it before you post it.
I hope this helps anyone that hasnt figured it out yet.
Danny, call me and I will talk you through it on the phone.
The copied "HTML code" will look something like this.........
/"https://s238.photobucket.com/albums/ff230/Towgirlfl/99%20Dodge/bumpers/?action=view¤t=IMG00900-20091218-1228.jpg" target="_blank">
towgirlfl- Full Member
- Name : Stephanie Cahill
Years in towing : 20
Location : Palm Beach Gardens, FL
Gale25yrs- Full Member
- Name : Gale Lingle
Years in towing : 36
Location : Battle Ground, Wa.
Countryduck27- Full Member
- Name : Bryan Hood
Years in towing : 10
Location : South Carolina
Re: Can I post Images?
Awesome!! That was a test lol
Countryduck27- Full Member
- Name : Bryan Hood
Years in towing : 10
Location : South Carolina
Page 1 of 2 • 1, 2
Similar topics
» Something NEW for TowInfo Members with a TWIST!!!
» editing a post
» 1st time post
» How to post Pictures with Photobucket
» Post Activity Email Notice
» editing a post
» 1st time post
» How to post Pictures with Photobucket
» Post Activity Email Notice
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|